| |
| META TOPICPARENT |
name="EWheelEn" |
%DASHBOARD{ section="banner" |
|
<
< | image="/twiki/pub/Velo/BlingBlingTechnikEn/prototyp2.jpg"
title="Bling-Bling Technology" |
>
> | image="/twiki/pub/Velo/BlingBlingTechnik/prototyp2.jpg"
title="Bling-Bling History" |
| | titlestyle="color:#F00000;"
}%
Funktionsmuster |
|
<
< |
| Error: (3) can't find proto1-arduino.jpg in Velo |
Error: (3) can't find proto1-batterie.jpg in Velo |
|
>
> |
 mit Wrap-Drähten verdrahtet |
 LiPo-Akku und KL25Z Huckepack |
|
| | Mit 12 LEDs, Freescale FRDM-KL25Z und Arduino Proto Shield. Proof of Concept (Machbarkeitsnachweis). Januar 2014.
1. Prototyp |
|
<
< |
| Error: (3) can't find proto2.jpg in Velo |
Error: (3) can't find DSCN2361.JPG in Velo |
Error: (3) can't find DSCN2359.JPG in Velo |
Error: (3) can't find DSCN2360.JPG in Velo |
Error: (3) can't find proto3-epoxy.jpg in Velo |
|
>
> |
| |
|
|
|
 Mit Epoxy-Kleber vergossen |
|
| | Mit 16 LEDs, inkl. Bluetooth Low Energy (BLE), Microcontroller MKL25Z128VLK4 von Freescale, ca. 165 mm x 44 mm gross. April 2014.
2. Prototyp |
|
<
< |
| Error: (3) can't find proto3-pcb.jpg in Velo |
Error: (3) can't find proto3-hr.jpg in Velo |
Error: (3) can't find proto3-vr.jpg in Velo |
| Error: (3) can't find vergossen-top.jpg in Velo |
Error: (3) can't find vergossen-bottom.jpg in Velo |
|
|
>
> |
| |
|
|
 Vergossen mit Polyurethan |
|
|
|
| | Mit 32 LEDs (jeweils 16 vorne und hinten), neuer Microcontroller MK22DX256VLF von Freescale, ca. 160 mm x 30 mm gross. Hardware etwa Juli 2014, Software Oktober 2014.
3. Prototyp |
|
<
< |
| Error: (3) can't find proto1.3-top.jpg in Velo |
Error: (3) can't find proto1.3-bottom.jpg in Velo |
Error: (3) can't find proto1.3-top-pur.jpg in Velo |
Error: (3) can't find proto1.3-bottom-pur.jpg in Velo |
|
>
> |
| |
|
|
 Vergossen mit Polyurethan |
|
| | Nur wenig Änderungen gegenüber 2. Prototyp. Neu: Beschleunigungssensor, Hall-Sensor statt Reed, JTAG-Stecker auf Rückseite. Hardware etwa Januar 2015, Software Februar 2015.
Gehäuse, 3D CAD Modell |
|
<
< |
| Error: (3) can't find assembled-top.png in Velo |
Error: (3) can't find assembled-bottom.png in Velo |
Error: (3) can't find unterteil.png in Velo |
Error: (3) can't find oberteil.png in Velo |
| Error: (3) can't find 3d-print-top.jpg in Velo |
Error: (3) can't find 3d-print-bottom.jpg in Velo |
|
|
|
>
> |
|
| |
--  Peter Schmid - 2014-10-17 |
Copyright © 2008-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.